Volkswagen Up radio code

A code may be needed after a power loss or when the radio is moved to another car. Some factory-paired units recognise their original car: switch on the ignition first, then the radio. If it still asks for a code, find the radio's serial number.

A typical serial starts with VWZ and has 13 characters, for example VWZ1Z2K8198892. Look on the label or for a number stamped into the casing. Keep every letter and zero. The large part number beside the manufacturer's logo is a different identifier.

This form needs the radio's serial number. The VIN identifies the car and cannot replace the radio serial, particularly if a previous owner changed the unit.

Most radios covered here have a label on the casing. Switch off the radio and ignition, then release the unit using the method for its mounting: removal keys in the slots, or removing the trim and retaining screws. If you can reach the label, you do not need to disconnect the wiring. Do not pull on the wiring loom. RNS-E and certain SEAT radios can show the serial on screen; see the guide above.

Reading the number directly from the unit is the most reliable option. A card may belong to a radio that was previously fitted. Serial No. identifies the radio; Code No. is the actual PIN. They are different fields.

Barcode text may contain extra characters such as 014, asterisks or a check character. Compare it with the serial printed separately or stamped into the metal. Do not guess between I/1, O/0 or Z/2. The examples also cover older Grundig formats used in SEAT and Škoda radios.

No. The same car model could have different radios fitted, and the unit may have been replaced. Identify it by its appearance and label. The guide photos help you recognise it; code availability is checked using its serial number.

The older radios covered here use a four-digit code. Depending on the panel, use station buttons 1–4, the buttons beside the display or a rotary control to set the digits. On a touchscreen, select them directly. The confirmation control varies by model, so follow the instructions beside your radio above or in its manual. “1000” is the code entry screen, not a universal radio code.

SAFE can mean the radio is waiting for its code. SAFE 2 or 2 SAFE often follows incorrect attempts. Many older units need to remain switched on for about an hour, with the ignition on as well where the model requires it. Interrupting the power may interrupt the wait. Enter the correct PIN once the code entry screen returns. The exact waiting time and conditions depend on the radio.

Use the serial number of the radio you bought, rather than the previous unit's serial or the car's VIN. A PIN does not replace vehicle configuration. If the unit reports component protection, separate diagnosis and adaptation are needed.

Yes. The code stays linked to the same radio. Keep it with the serial number so you can use it again whenever the unit requests its PIN. A replacement radio needs its own code.

Enter your radio serial number and continue. You will see the price and availability before payment. If the form requires a label photo, attach it in the upload field.

Compare the serial in your order with the label, check every PIN digit including any leading zero, and use the confirmation method for your model. The code must belong to the radio currently fitted in the car. If incorrect attempts have stopped code entry, wait as directed in the radio’s manual.

No. Component protection is a different system from a four-digit code prompt. It is used in newer MIB and Audi MMI systems, among others. Composition Media, Discover Media/Pro, newer Media System, Bolero, Amundsen and Columbus units may need workshop diagnosis and adaptation.

The delivery time depends on the radio model. In most cases, codes are delivered within a few minutes after payment. The estimated delivery time will be shown in the order summary on the next step.